| 1 |
Single |
Our most popular bracket. Strong and simple.
A great choice for most applications. |
Projection: 3-1/2"
Base: 1" × 4" |
| 2 |
Braced Bracket |
A welded brace is recommended for heavier treatments and projections over 6". |
Base: 1" × 4" |
| 3 |
Adjustable Bracket |
Recommended for use with bay rods, curved rods, and returns. |
Projection: 3" – 4-1/4" (3-1/2" – 4-3/4" for 1-5/8" rods)
Base: 1" × 4" |
| 4 |
Staggered Bracket |
For rods up to 1", under rod bracket is 2-1/2" below the over rod bracket.
For 1-5/8" rods, under rod bracket is 3-3/8" below the over rod bracket. |
Projection: 3" & 6"
Base: 1" × 4" |
| 5 |
Double Bracket |
|
Projection: 3" & 6"
Base: 1" × 4" |
| 6 |
Center Double Bracket |
Use as a center support only.
When using heavy panels or spanning very wide openings, we suggest using a Double bracket instead of a Center Double bracket. |
Projection: 3" & 6"
Base: 3-1/2" × 1" (for rods up to 1")
Base: 3-1/2" × 1-1/2" (for 1-5/8" rods) |
| 7 |
Center Bracket |
Use as a center support only.
When using heavy panels or spanning very wide openings, we suggest using a Single bracket instead of a Center bracket. |
Projection: 3-1/2"
Base: 3-1/2" × 1" (for rods up to 1")
Base: 3-1/2" × 1-1/2" (for 1-5/8" rods) |
| 8 |
Center Adjustable Bracket |
Use as a center support only.
When using heavy panels or spanning very wide openings, we suggest using an Adjustable bracket instead of a Center Adjustable bracket. |
Projection: 3" – 4-1/4" (3-1/2" – 4-3/4" for 1-5/8" rods)
Base: 3-1/2" × 1" (for rods up to 1")
Base: 3-1/2" × 1-1/2" (for 1-5/8" rods) |
| 9 |
Tapestry Bracket |
Optional screw-on rosette available to replace set screw.
Note: some finials and rings may require more clearance.
Please contact us if unsure.
See Tapestry Hooks for hooks that may also be used for tapestry applications. |
Clearance to back of rod: 1/2"
Base: 1" × 4" |
| 10 |
Swivel Bracket |
Base swivels to allow installation in different positions.
Recommended for use with arch top rods and as a center support for 1/2" and 3/4" French rods. |
Projection: 3" – 5"
Base: 1" × 3-1/2" (for rods up to 1")
Base: 1-1/2" × 3-1/2" (for 1-5/8" rods) |
| 11 |
Pass Through Bracket |
Base swivels to allow installation in different positions.
Not for ceiling installation. Not for use with French rods unless spliced. |
Projection: 3" – 5"
Base: 1" × 3-1/2" (for rods up to 1")
Base: 1-1/2" × 3-1/2" (for 1-5/8" rods) |
| 12 |
Ceiling Bracket |
Ceiling brackets will be made to the minimum drop (measured from the ceiling to the top of the rod). |
Base: 3-1/2" × 1"
1/2" rods: 1-1/4" minimum drop, 2" overall length
3/4" Round rods: 1-3/8" minimum drop, 2-3/8" overall length
3/4" Twist & 1" rods: 15/8" minimum drop, 2-7/8" overall length
1-5/8" rods: 2-1/8" minimum drop, 4" overall length |
| 13 |
Socket |
For inside mounting. |
Specify rod side (left or right) for set screw along with exact inside mount dimensions below. We will make deductions. Provides a minimal look. |
| 14 |
Corner Bracket |
Allows installation directly into a corner. |
Projection adjusts from 3"–5". Hinged base is 3" × 3".
Splices into 1" rods. Fits over 1/2" – 3/4" rods.
Not recommended for use with 15/8" rods or heavy treatments. |
| 15 |
Bypass Bracket |
Recommended for large curved rods or excessive spans.
Available for special applications with 15/8" rods using 21/2" C rings or with 1" rods using 2" C rings. |
Base: 1" × 3-1/2" (for 1" rods)
Base: 1-1/2" × 3-1/2" (for 1-5/8" rods) |
| 16 |
Double Bypass Bracket |
Recommended for large curved rods or excessive spans.
Available for special applications with 15/8" rods using 21/2" C rings or with 1" rods using 2" C rings. Not available for smaller rods. |
Base: 1" × 3-1/2" (for 1" rods)
Base: 1-1/2" × 3-1/2" (for 1-5/8" rods) |
| 17 |
Ceiling Bypass Bracket |
Recommended for large curved rods or excessive spans.
Available for special applications with 15⁄8" rods using 21⁄2" C rings or with 1" rods using 2" C rings. Not available for smaller rods. |
Base for 1" rods: 1" × 3-1/2"
Base for 1-5/8" rods: 1-1/2" × 3-1/2"
Projection: 2"
Drop for 1" rods: 1-5/8" to top of rod
Drop for 1-5/8" rods: 2-1/8" to top of rod |
