1 |
Single |
Our most popular bracket. Strong and simple. A great choice for most applications. |
Projection: 3-1/2" Base: 1-1/2" × 3-1/2" |
2 |
Braced Bracket |
A welded brace is recommended for heavier treatments and projections over 6". |
Base: 1-1/2" × 3-1/2" |
3 |
Adjustable Bracket |
Recommended for use with bay rods, curved rods, and returns. |
Projection: 3" – 4-1/4" (3-1/2" – 4-3/4" for 1-5/8" rods) Base: 1-1/2" × 3-1/2" |
4 |
Double Bracket |
|
Projection: 3" & 6" Base: 1-1/2" × 3-1/2" |
5 |
Center Double Bracket |
Use as center support only. When using heavy panels or spanning very wide openings, we suggest using a Double bracket instead of a Center Double bracket. |
Projection: 3" & 6" Base: 3-1/2" × 1-1/2" |
6 |
Center Bracket |
Use as center support only. When using heavy panels or spanning very wide openings, we suggest using a Single bracket instead of a Center bracket. |
Projection: 3-1/2" Base: 3-1/2" × 1-1/2" |
7 |
Center Adjustable Bracket |
Use as center support only. When using heavy panels or spanning very wide openings, we suggest using an Adjustable bracket instead of a Center Adjustable bracket. |
Projection: 3" – 4-1/4" (3-1/2" – 4-3/4" for 1-5/8" rods) Base: 3-1/2" × 1-1/2" |
8 |
Tapestry Bracket |
Optional screw-on rosette available to replace set screw. Note: some finials and rings may require more clearance. Please contact us if unsure. See Tapestry Hooks for hooks that may also be used for Tapestry applications. |
Clearance to the back of rod: 1/2" Base: 3-1/2" × 1-1/2" |
9 |
Swivel Bracket |
Base swivels to allow installation in different positions. Recommended for use with arch top rods and as a center support for 1/2" and 3/4" French rods. |
Projection: 3" – 5" Base: 1-1/2" × 3-1/2" |
10 |
Pass-Through Bracket |
Base swivels to allow installation in different positions. Not for ceiling installation. Not for use with French rods unless spliced. |
Projection: 3" – 5" Base: 1-1/2" × 3-1/2" |
11 |
Ceiling Bracket |
Ceiling brackets will be made to the minimum drop (measured from the ceiling to the top of the rod). |
Base: 3-1/2" × 1" 1/2" rods: 1-1/4" minimum drop, 2" overall length 3/4" Round rods: 1-3/8" minimum drop, 2-3/8" overall length 3/4" Twist & 1" rods: 15/8" minimum drop, 2-7/8" overall length 1-5/8" rods: 2-1/8" minimum drop, 4" overall length |
12 |
Socket |
For inside mounting. Specify rod side (left or right) for set screw along with exact inside mount dimensions below. We will make deductions. Provides a minimal look. |
Base: 1-1/2" × 3-1/2" |
13 |
Bypass Bracket |
Recommended for largely curved rods or excessive spans. Available for special applications with 1-5/8" rods using 2-1/2" C rings or with 1" rods using 2" C rings. |
Base: 1" × 3-1/2" (for 1" rods) Base: 1-1/2" × 3-1/2" (for 1-5/8" rods) |
14 |
Double Bypass Bracket |
Recommended for large curved rods or excessive spans. Available for special applications with 1-5/8" rods using 2-1/2" C rings or with 1" rods using 2" C rings. Not available for smaller rods. |
Base: 1-1/2" × 3-1/2" |
15 |
Ceiling Bypass Bracket |
Recommended for large curved rods or excessive spans. Available for special applications with 1-5/8" rods using 2-1/2" C rings or with 1" rods using 2" C rings. Not available for smaller rods. |
Base: 1-1/2" × 3-1/2" Projection: 2" Drop for 1" rods: 1-5/8" to top of rod Drop for 1-5/8" rods: 2-1/8" to top of rod |